Invacare Oxygen Tubing Connector - MS4301

Overview

The Invacare MS4301 Oxygen Tubing Connector joins together oxygen tubing that has either broken or needs to be extended or attached to another oxygen tube connection. The tube connector is used in between where there has been a break in the oxygen supply tubing. It makes it simple to repair tubing that has been bent so many times over in a single section that is now starting to wear and thin out. In this case, individuals awaiting a new oxygen tube may cut out the broken section. In other cases, extending the oxygen tubing may be something you are considering in doing. The Invacare connector is beneficial for both of these scenarios.

The Invacare Connector for Oxygen Tubing Supply is secure enough to fasten but not so strong that it's necessary to remove the connector with scissors. With a 5- to 7-millimeter connecting end, different sizes of tubing can be securely connected. The clear, opaque white design makes it easy to see if the tubing being connected is secured well enough.

The tubing connector is disposable and should be replaced often. Using the same connector for too long can create a breeding ground for bacteria to grow inside the passageway of the connector and give off foul odors and increase the risk of respiratory system harm. Replacing the connector occasionally depending on use is a safety best practice.

Product Features and Benefits

• Connect Oxygen Tubing Together for More Length
• 5- to 7-Millimeter Connecting Ends
• Clear, Opaque White Design
• Disposable

Product Specifications

• Manufacturer: Invacare
• Product Number: MS4301
• Application Connector: Supply Tubing
• For Use With: Oxygen Supply Tubing
• Specifications: 5 to 7 Millimeter Ends
• Color: Opaque White
• Application: Oxygen Tubing Connector