Customers Also Bought
Why Ritter M9D AutoClave Automatic Sterilzer
The Ritter M9D UltraClave® Automatic Sterilizers by Midmark are an efficient addition to any clinic. This Ritter Medical autoclave sterilizercan be used as a medical sterilizer and dental sterilizer and is very user friendly. It has 4 pre-programmed sterilization cycles that make it ready to use with minimal set-up time and provides ample room to sterilize a variety of instruments.
Ritter M9D UltraClave® Features
- Steam-Flush Pressure Pulse Air Removal System
- Self Program Controls
- Pre-Programmed Controls
- LCD Display
- Series of "How-to" videos online
There are a number of benefits to using this as an automatic dental sterilizer. Preprogrammed settings make it easy to use and set up. The Steam-Flush system ensures proper steam penetration. Self Program Controls enable the user to alter the cycle specifications to meet whatever requirements an instrument may need. The Ritter Medical autoclave also has Pre-Programmed Controls to facilitate easy installation and use. Finally the LCD display offers a convenient view of the autoclave status.
For the Midmark, dental tools are easily sterilized and the set-it-and-forget-it programming saves time for dental clinics. The Pre-Programmed cycles make this an good choice as an autoclave for dental clinics because the programs are ready and easy to use right out of the box.
The Pre-Programmed cycles include the following:
- Unwrapped: 270ºF(132ºC)/27.1 psi(186 kPa) Sterilize for 3 minutes 30 minute dry
- Pouches: 270ºF(132ºC)/27.1 psi(186 kPa) Sterilize for 5 minutes 30 minute dry
- Packs: 250ºF(121ºC)/15psi(104 kPa) Sterilize for 30 minutes 30 minute dry
- Handpieces: 270ºF(132ºC)/27.1 psi(186 kPa) Sterilize for 6 minutes 30 minute dry
The M9 autoclave's 2 user defined programs can be set to range in temperatures from 230ºF(110ºC)-275ºF(135ºC), pressures from 6 PSI(41kPa)-31 PSI(214kPa), and sterilization times from 3-90 minutes.
Ritter M9D UltraClave® Specifications
- Overall length w/plug: 20.4"(51.8cm)
- Overall width: 15.4"(38.9cm)
- Overall height w/printer: 15.8"(40.1cm)
- Minimum Countertop area: 15.3"x17.9"(38.9cmx45.4cm)
- 9" diameter(22.9cm)
- 15" depth (38.1cm)
- 3.5 gal. usable volume (13.4 liters)
- Two large-7.3" Wide x 12" Long x 0.8" Deep (18.6cm x 30.5cm x 2.2cm)
- Two Small-5.6" Wide x 12" Long x 0.8" Deep (14.3cm x 30.5cm x 2.2cm)
- Unit weight: 73 lbs. (33.1 kg)
- Shipping weight: 81 lbs. (36.7 kg)
- Water reservoir capacity: 1.1 gal. (4.1 liters)
- Electrical requirements:
- 115 VAC, 50/60 Hz, 15 Amps Single Phase
- 115 VAC has 1425 watt tubular immersion heater
- Product ID: M9022
Ritter M9D Ultraclave® Additional documents
- Additional Information
Manufacturer Midmark Ships Free Yes
- Community Q&A
Product QuestionsNo questions yet. Be the first to ask the question!