Huntleigh Flowtron Hydroven 1 Garments & Inserts

The Flowtron Hydroven 1 Garments work
as an Intermittent Compression System.
They replace the old Flowtron system.

Hydroven 1 Garments are single chamber garments that provide uniform compression to the effected limb. The Flowtron Hydroven 3 is a new Intermittent & Sequential combination pump from Huntleigh Healthcare. This pump will work with both the single chamber garment of the Flowtron and the three chamber gradient sequential garment of the Flowplus. Having one pump that works with 2 different types of garments helps minimize

Features of the Flowtron Hydroven 3 Pump using Hydroven 1 Garments:

• Single chamber uniform compression
• Patented garments are designed for maximum comfort
• Soft and pliable
• Prevents chafing and pinching
• Full length zippers for ease of use.
• Washable
• Lightweight, portable pump features pressure gauge, pressure regulator dial, 90 seconds inflation / 90 seconds deflation
• Bilateral compression capability

Measurement Instructions:

When measuring for Arm Garments, you should measure from the arm pit to the wrist. The circumference measurement for an arm garment should be made at the widest part of the arm, either the shoulder or the bicep. All measurements are in inches.

When measuring for Leg Garments, you should measure from the gluteal fold, the crease where buttocks meet thighs, to the ankle. The circumference measurement for an arm garment should be made at the widest part of the leg, Typically the thigh. All measurements are in inches. Click on the following link to view the Huntleigh Compression Garment Sizing Chart.

*Note when selecting sleeve length the total sleeve length should never encroach within 1 1/2 inches of your groin or underarm or circulation can be impeded.