Sunset Healthcare Solutions Filter and Check Valve Kit for SoClean 2 CPAP Cleaning Device Overview
This is a replacement cartridge kit that works with the SoClean 2 CPAP Cleaner & Sanitizer. The kit includes a filter and a check valve. Both components need to be replaced about every six months to maintain effective and thorough CPAP sanitization.
The Sunset Healthcare Solutions Filter and Check Valve Kit provides a replacement filter and check valve for the SoClean 2 CPAP Cleaning Device. Sunset Healthcare Solutions warrants that the product will fit and work in the SoClean 2 CPAP cleaning device, although the product is not made, authorized, or endorsed by SoClean, Inc.
Replace the filter and check valve in the SoClean 2 CPAP Cleaning Device every six months, according to the manufacturer's recommendations.
Features and Benefits
- Replacement Filter Converts Enclosed Air to Regular Oxygen
- Check Valve Prevents Water From Harming Electronic Components
- Filter Lasts for Six Months With Daily Use
- Easy To Install
Frequently Asked Questions
How long does the filter last?
Roughly every 6 months if it's used daily.
How do users know when to change the filter?
The LED display will read "Order Filter Kit."
Why does the filter and check valve need to be replaced?
New filters and valves are critical for the device to work effectively.
How do I reset the machine after replacing the filter?
Press and hold the "Hourglass" and "Manual" buttons at the same time. Only reset the machine after replacing the filter.
How to Change the Filter and the Check Valve
- Open the top lid of the SoClean 2.
- Remove the old filter by pulling it up and out.
- Throw away the old filter.
- Remove packaging from the new filter.
- Wipe off the exterior of the filter with a soft cloth.
- Place the new filter into the empty filter slot.
- Grab the barrel of the current check valve and pull the tubing away.
- Repeat to disconnect the other end of the tubing.
- Connect the replacement check valve. The direction is critical. The check valve is labeled with two arrows that should point toward the SoClean 2. Insert the stem of the new check valve as far as possible into the tubing. Repeat on the other side.
- Reset replace filter function by pressing and holding the "Hourglass" and "Manual" buttons until you see a smiley face on the screen.
- The machine is ready to use.
Specifications
- Manufacturer: Sunset Healthcare Solutions
- Product Number: CAP1007S-KIT
- Weight: 0.25 Pounds
- Width: 5 Inches
- Length: 5 Inches
- Depth: 2 Inches
- UPC: 187293000761
Login and Registration Form