This Oxygen Tubing Y-Adapter makes it possible to split one oxygen tubing line into two lines. This Oxygen Accessory has a corrugated elbow joint on the input line for a firm connection to CPAP lines, Tracheotomy adapters and more.
The 22 mm O.D. tubing connector on each Y-Leg connects to Standard Oxygen Tubing that could be ran from an oxygen concentrator or regulator, CPAP Tubing and More.
The most common use for this Y-Adapter would be attaching it to a tracheotomy tube with either a 22mm I.D. or 15mm O.D. adapter.
Also known as a splitter, you may use these Y-Connectors for industrial, as well as medical, uses. If you are using an oxygen concentrator for industrial purposes speak to a customer service representative about the procedure for such a purchase.
Airlife Y-connectors can also be used when splitting oxygen between two patients. Keep in mind, splitting oxygen between two patients will reduce the LPM flow to the patient by half.
What this means is, if two patients were at a setting of two, then the machine should be set to a minimum of 4 LPM.
This Y-Connector features two hinged ports with airtight lids. The pressure sensor port allows for the connection of CPAP pressure line that will regulate pressure in the system. The Thermometer port is for temperature regulation.Basically, with Airlife Y-Connectors you can use a variety of respiratory products, but always consult your doctor when determining the Respiratory Treatment that you require.Oxygen Tubing Y Adapter Features and Benefits
- Features a Thermometer Port
- Integral Pressure Sensing Port
- Allows for Multi-Patient Oxygen Use
Oxygen Tubing Y Adapter Specifications
- Y-Arms Fit: 22mm O.D. Tubing
- Elbow Fits Adapter Sizes: 22mm I.D. and 15mm O.D.
- Latex Free
- HCPCS Code: A4649
- AirLife Y Adapter Product Number: 001831
Login and Registration Form