The smpl Wander Alert Motion Sensor (Simpl Technology 58020) is a battery-powered wander and fall emergency alarm for care recipients, including elders in cognitive decline (such as those with Alzheimer’s and dementia), care recipients with disabilities (such as Down syndrome and Autism, and young children. These alarm systems can be used both in homes and at nursing homes and other care facilities.
Alarms will sound when sensors have been set off within 100 to 200-foot range in a home or business or a 250 foot range in an open area. Because caregivers carry the alarm with them, care recipients will not be distressed by hearing the alarm going off.
The smpl Wander Alert Alarm kits come in a variety of options. Kits can be purchased with a door sensor and pager, a room motion sensor and pager, or an SOS/help FOB or pendant and Pager. The Complete Alert Kit can also be purchased and it includes all four of the previously mentioned items.
Extra pagers and sensors can also be purchased as add-ons for additional home and facility coverage. Up to twenty extra sensors can easily be paired with a single pager. Conversely, one sensor can be paired with each pager so more caregivers can be paged in case of a patient or loved one tripping a sensor. If desired, each pager can be programmed with its own unique alert sound and volume levels so caregivers better know where to find their care recipient when the pager sounds.
Manufacturer smpl Technologies states that the smpl Wander Alert Alarm kits not only keep care beneficiaries safer, but they can also allow caregivers to move about their day with less worry. While caregivers should still stay aware of when their wards might need assistance, caregivers can also focus on their daily tasks without having to monitor care recipients without a moment of respite.
smpl Wander Alert Alarm kits do not require wiring, an internet connection, or Bluetooth for use or installation. These factors reduce the chances of product malfunctions and technical issues and no internet means there are no additional charges or fees required after the purchase of this product. The first sensor and pagers come paired upon purchase and pairing additional pagers or sensors is simple. Sensors included in the smpl Wander Alert wireless alarm for care recipients include a pre-installed battery and double-sided tape for quick and easy installation. In addition, all smpl portable pagers need for use are two AAA batteries.
Smpl Wander Alert Component Descriptions and Installation Guidelines
smpl Pager (for All Wander Alert Systems)
The smpl Pager can be paired with any other smpl Wander Alert product. This includes the Door Sensor, the Motion Alert, and the SOS/Help Alert. The smpl Pager allows users to choose from fifty different alert melodies, so a different melody can be chosen for each place a sensor is set up. Due to this fact, caregivers using the smpl pager can arrive at the correct place quickly and without confusion. The smpl Pager can be carried in a pocket, clipped to a belt or jacket, or simply placed near the caregiver. It also has four different volume settings and it sounds, vibrates, and flashes when a sensor is tripped. For these reasons, caregivers are unlikely to miss an alert.
smpl Wander Door Motion Sensor Alert Kit
The smpl Wander door sensor alert keeps care recipients safe by immediately sounding, vibrating, and lighting up when they enter monitored doors and hallways or open monitored windows and cabinets.
Door Sensor Alert kits come with three parts: a door sensor, a magnet, and a pager. With a strong double-sided tape on the magnet and sensor, all one has to do to install this system is attach the sensor to the doorframe and then attach the magnet to the door no more than ¾ of an inch away from the sensor. If needed, moving the door sensor kit to another spot in the home (or a different home) can be done without difficulty. The door sensor is wireless, communicates with the included pager via radio frequencies, and is battery operated.
The door sensor comes with a button-cell battery. This battery will last approximately six to twelve months. An indicator light flashes blue when the door the motion sensor is next to opens. This indicator light will flash red when the battery is close to dying. Replace the battery as soon as you see the light flashing red to avoid problems that might occur in the event of a dead battery.
smpl Wander Alert Motion Sensor Alert Kit
The motion sensor Patient Safety Alarm can be placed anywhere in a home or facility to ensure that care recipients don’t enter certain areas, such as hallways, stairways, and more. Like the door sensor alarm, the motion alert kit uses radio frequencies to communicate with the pager and is wireless and battery operated. Movement can be detected within about 20 feet about the installed motion sensor.
For installation, use the included double-sided tape to install the motion alert kit three to four feet from the ground. This item comes with a button-cell battery that has about six to twelve months of battery life. An indicator light that typically flashes blue will flash red when the battery is low on energy. Replace the battery as soon as you notice the light flashing red.
smpl SOS/Help FOB or Pendant Kit
The SOS/Help alert system is for emergency falls and other instances when a care recipient needs assistance from their caregiver. This item can be carried by users with either the included FOB or the included lanyard.
Customers that are interested in the Wander Alert kits by smpl may also be interested in other wander alarms, such as the Motion Activated Caregiver Paging System by Smart Caregiver.
Features and Benefits
- Immediate Notification when Care Recipients Wander to Potentially Dangerous Locations
- Can Be Used for Care Recipients with Dementia, Alzheimer’s, or Disabilities
- Can Be Used for Child Safety Purposes
- Wireless System
- Pagers Have About a 100 to 200-Foot Range from the Sensor in Homes and Facilities
- In Open Spaces, Pagers Have About a 250-Foot Range from the Sensor
- Sounds, Vibrates, and Lights Up to Alert Caregivers
- Clips to Pocket or Belt or Can Be Carried in a Pocket
- Up to Twenty-One Sensors Can Be Paired with One Pager
- Up to Twenty Pagers Can Be Paired with One Sensor
- Unique Sounds Can Be Programmed for Each Pager (If Desired)
- Monitor Doors, Windows, Cabinets, Hallways, and More
- No Internet, Bluetooth, or Wiring Required for Use or Installation
- Pre-Installed Battery and Double Sided Tape Included with Sensors
- Sensors and Pagers Come Paired Upon Purchase (No Pairing Required)
- No Monthly or Hidden Fees
- May Increase Care Recipient Safety
- May Help Ease the Minds of Caregivers
Product Specifications
General
- Product Manufacturer: Simpl Technology
- Product Number: 58020
- Application: Wander and Fall Alarms for Care Recipients with Disabilities and Children
- Transmission Distance: Open Air Up to 250 Feet; Indoors 100 to 200-Feet
- Wireless: Yes
- Wifi Requirement: No
- Color: White
smpl Pager
- Pager Power: Two AAA Batteries (Not Included)
- Volume: 25 – 110 dB
- Height: 3.5 Inch
- Width: 2.25 Inch
- Depth: 1 Inch
Door Sensor Alert Kit
- Power: Pre-Installed Button Cell Battery (CR1632)
- Door Sensor Height: 1 ¾ Inch
- Door Sensor Width: 1 Inch
- Door Sensor Depth: 3/8 Inch
- Magnet Height: 1 Inch
- Magnet Width: 3/8 Inch
- Magnet Depth: 5/16 Inch
Motion Alert Kit
- Power: Pre-Installed Button Cell Battery (CR1632)
- Detection Range: Up to 20 Feet
- Motion Alert Height: 1 ½ Inch
- Motion Alert Diameter: 1 ¼ Inch Diameter
SOS/Help FOB or Pendant Kit
- Power: Pre-Installed Button Cell Battery (CR1632)
- Height: 2.25 Inch
- Width: 1.2 Inch
Manuals and Documents
Product Manual contains use and care instructions.
- Product Pamphlet contains smpl product descriptions.
Login and Registration Form