MAP Microtube for Automated Capillary Blood Processing
BD Microtainer MAP Microtubes are capillary blood collection tubes designed for automated hematology testing in pediatric, outpatient, and difficult-draw settings. Each tube contains K2 EDTA to help preserve the specimen for hematology analysis while supporting compatibility with automated laboratory workflows.
These microtubes collect 250 to 500 microliters of capillary blood, which helps support smaller-volume collection when full venipuncture is not preferred or practical. The clear option, item #363706, supports easier visual fill confirmation, while the translucent option, item #365974, is used for workflows that benefit from reduced light exposure.
Built for closed-system lab processing, BD Microtainer MAP Microtubes use a lavender cap and an automation-ready format designed for analyzer racks and barcode-based specimen tracking. This design helps support cleaner handling, more consistent identification, and efficient movement through automated hematology workflows. Vitality Medical offers a variety of blood collection tubes for safe sampling.
Features and Benefits
- Minimizes Draw Volume for Pediatrics
- Reduces Relabeling and Orientation Errors
- Ideal for Automated CBC and Platelet Testing
- Streamlines Operations With Automatic Processing
- Bold 250–500 µL Markings for Small-Volume Blood Draws
- K2 EDTA Anticoagulant Additive for Sample Integrity
- Sterile, Single-Use Format Improves Laboratory Hygiene
- Environmentally-Friendly Recyclable Packaging
- Color-Coded Lavender Cap and Transparent/Translucent Tube
Specifications
- Manufacturer: Becton Dickinson
- Brand: BD Microtainer® MAP
- Country of Origin: Unknown
- Additive: K2 EDTA Additive
- Application: Capillary Blood Collection Tube
- Cap Color: Lavender
- Color Code: Lavender
- Closure Type: BD Microgard™ Closure
- Cap Material: High Density Polypropylene
- Tube Material: Polypropylene
- Tube Color: Transparent / Translucent
- Type: Hematology
- UNSPSC Code: 41121709
- Volume: 250 µL to 500 µL
- GTIN (363706) - Box of 50: 30382903637066
- GTIN (363706) - Box of 200: 50382903637060
- GTIN (365974) - Box of 50: 30382903659747
- GTIN (365974) - Box of 200: 50382903659741
Dimensions (363706)
- Length: 75 mm
- Width: 13 mm
Dimensions (365974)
- Length: 46 mm
- Width: 15.3 mm
Additional Resources
Safety Data Sheet Most orders are processed and shipped within 24 hours!
Comparison Table
Use the table below to compare the two BD Microtainer MAP Microtube options by material, visibility features, and recommended use cases.
| SKU | Tube Material | Visual Features | Ideal Use Case |
|---|---|---|---|
| 363706 | Clear | Transparent fill lines visible | General hematology workflows |
| 365974 | Translucent | Light filtration for sensitive samples | Light-sensitive specimen handling |
Frequently Asked Questions (FAQs)
What are BD’s suggested centrifugation times and speeds?
Spin Microtainer tubes with gel at 6000 to 15000 relative centrifugal force for 90 seconds, and non-gel tubes at a minimum of 2000 relative centrifugal force for 3 minutes.
What is the average amount of K2EDTA in the tubes?
Approximately 1.0 mg, which is enough to anticoagulate a blood volume from 250 to 500 µL.
What kind of plastic material is used to manufacture BD Microtainer tubes?
The tubes are made of polypropylene, while the caps are made of high-density polyethylene.
How long do tubes remain stable after blood collection?
Samples can remain in Microtainer tubes at room temperature for up to four hours before hematological determinations are performed.
Can the tubes be used for lead determination?
The BD Microtainer K2EDTA with Microgard closure, item 365974, is approved for lead determination, with a background amount of less than 1 ng per tube.
What is BD Microtainer’s suggested order of draw?
CLSI Procedures and Devices for the Collection of Diagnostic Capillary Blood Specimens recommends the following order of draw:
- EDTA tubes
- Other additive tubes
- Serum tubes
Login and Registration Form