Customers Also Bought
Malem ULTIMATE Bedwetting Alarm is designed for deep sleepers. This is a lightweight enuresis alarm that provides sound, vibration and a flashing light when the alarm is activated. The audible and vibration alarm functions are selectable to meet the needs of the individual child. A selection switch can be easily set to sound only, sound and vibration or vibration only.
Malem ULTIMATE Bedwetting Alarm comes in three different audio versions:
- 1 tone alarm (color options: pink, blue and purple).
- 8 tone random alarm (color: gold).
- 8 tone alarm with random tone and selectable tone options (color options: magenta, royal blue and camouflage).
Some parents have found that alarms with multiple tones are helpful for children with the tendency to tune out familiar sounds. The additional stimulation of vibration can also be very helpful for these types of children.
The Ultimate Bed Wetting Alarms is also available as a Starter Kit which includes 2 protective mattress overlays and the helpful instructional manual for parents-- Seven Steps to Nighttime Dryness: A Practical Guide for Parents of Children with Bedwetting.
The Ultimate Bedwetting Alarm is comfortably worn on the child’s pajamas near the shoulder. This bed wetting alarm warns children when they begin to wet the bed during sleep. A clip-on moisture sensor attaches to the child’s briefs and activates the alarm upon detecting urine. The sensor is located within the clip so that when the clip is attached to the outside of the child’s underwear, skin contact or sweating will not activate the alarm. The bedwetting alarm alerts the child and family that they need to get up to go to the bathroom.
The Ultimate bedwetting alarm is brightly colored and constructed to attract the interest of children and thereby increase their acceptance. The design is durable and yet small enough not to interfere with the child’s normal routines. This bed wet alarm was developed for children less than eight years old.
The Ultimate Bedwetting Alarm, unlike other bed wetting alarms, requires no sewing, no metal clips, no snaps, no mini pads and is essentially hassle free. The bedwetting alarm sensor should be cleaned with soapy water and a small brush weekly to remove urine residue. The alarm sounds continuously until the sensor is removed, allowing you or your child sufficient time to effectively respond to the alarm.
Ultimate Bedwetting Alarm System Components
- Alarm Unit
- Alarm Sensor
- 2 AAA 1.5 Volt Batteries (Alkaline or Equivalent)
- Progress Charts
Malem ULTIMATE Bedwetting Alarm Features & Benefits
- Multiple Alarm Selections: audible, visual and vibration.
- Compact and lightweight.
- Easy-clip sensor attaches to outside of briefs.
- Brightly colored alarm unit to attract the interest of children.
- Additional Information
- Community Q&A