Drive Primus PrimeCare Ultimate High/Low Bed

Hospital Bed

The Primus Ultimate High/Low Bed is a fully electric Bariatric Hospital Bed with an ultra-low mattress deck. The low deck increases safety and comfort for bariatric patients, especially patients at risk of falling or injuring themselves when entering or exiting the bed.

Made by Primus Medical, this bed boasts a unique frame design that makes it adjustable by length and height. The length adjusts between three positions: 76, 80 and 84 inches long. In its low position, the bed deck rests only 6 7/8 inches off the ground. It can be raised to a high position of 30 7/8 inches off the ground.

See below for a list of features and specifications that make this one of the most versatile and easy-to-use hospital beds around.

The bed frame has a tubular, telescopic construction that makes it fast and easy to adjust its length and height. To make adjustments, just remove two screws, pull the bed frame to the desired length and then replace the screws. This feature helps the bed accommodated patients of different heights.

The low position on this bed makes it safer and easier for patients with limited mobility to enter and exit the bed. Conveniently, the bed can roll when set at any height position. It includes a caster wheel locking mechanism that can be engaged and disengaged by simply pressing a foot tab near the wheels.

This Full Electric Hospital Bed comes with a patient control pendant that controls the bed's electronic functions. The bed can rise and lower electronically at the head and knees, and it can also convert to trendelenburg and reverse trendelenburg positions. An optional control lockout is also available.

Another unique feature of this Low Hospital Bed is its heel lift ratchet. Separate from its electronic positioning functions, medical workers can pull up on the lower portion of the bed frame to quickly ratchet the foot of the frame into an elevated position.

Headboards and Footboards
A headboard and footboard must be purchased separately with the Primus Ultimate High/Low Bed. Make sure to match the correct head/footboard width to the width of the bed. 35 inches wide is the default, and 42 inches wide when using a width extension.

The headboards and footboards that we list in the accessories section with this bed are a rectangular shape and are available in either oak or mahogany. For additional head/footboard styles and colors, call us at 1-800-397-5899 for assistance. See Additional Head/Footboard Styles and Colors

If you need assistance moving and setting up your new bed, make sure to select the White Glove Delivery option prior to choosing "Add to Cart." With White Glove Delivery from Vitality Medical, you will have one to two highly skilled technicians that will move everything into your home, assemble it, ensure that it works properly, demonstrate its functionality and how to use it, and will remove any excess packaging upon leaving your home. Background checks have been done on every technician, so you can always rest assured that you're in safe hands.

White Glove Delivery is available by appointment in most states. Once you have placed your order, we will have an associate contact you to arrange a time that complements your schedule for the delivery and set up of your new bed.

***Disclaimer: White glove delivery is available in most states not including North Dakota. Please allow an additional 1-2 weeks for completion of white glove delivery.***

Bookmark Links

• Mattress Options
• Bed Rail Options
• Accessories
• Manuals and Documents

 

Key Specifications

• Product Number: P902
• Weight Capacity: 500 lbs.
• Bed Dimensions: 84.5, 88.5, 92.5L x 35W x 7 to 30.5H Inches
• Frame/Weld Warranty: 15/Lifetime
• Electrical Warranty: 3 years

PrimeCare Ultimate High/Low Bed Features & Benefits

• Adjustable lengths: 70, 80 and 84 inches
• Adjustable high and low positions: 6 7/8 in. or 30 7/8 in.
• Rolls at any height
• Caster lock mechanism
• Trendelenburg and reverse trendelenburg positions
• Can expand to 42 inch width (with optional width expander)
• IV pole holder
• Heel lift ratchet
• Welded steel frame

 

Foam Mattress Gravity 7 Long Term Care: 80" x 36 " x 6" Drive Medical Gravity 7 Long Term Pressure Redistribution Mattress

Ideally designed for long term use, as its design helps to protect users from pressure ulcers and keeps them dry; however, this mattress can be used to provide optimal comfort for short term patients, too.

• Water-resistant and tear-resistant cover
• Compatible with or without rails
• Multiple layers of foam, including memory foam
• Optimizes pressure redistribution through "zoned areas"
• Facilitates safe patient transfers through its solid edge
• Long-lasting through its unique articulation cuts
• Product Number: 15770
• Dimensions: 36 x 80 x 6 Inches
• Weight Capacity: 350 lbs
• Ultra-Soft heel section
• Material: High Density Foam

Gravity 9 Multi-Layered/Multi-zoned Foam Mattress 36" (W) X 80 " (L) X 6" (H) There are a lot of hospital mattresses on the market, but none can rival the comfort and support of the Gravity 9 Long Term Care Pressure Redistribution Mattress by Drive Medical. This mattress is specifically designed to keep the patient comfortable while protecting them from pressure ulcers. The mattress has a total of four, plush foam layers. The top layer is true memory foam and the bottom layer has horizontally scored articulation cuts to ensure that the mattress is durable and the weight of the patient is evenly distributed.

• Product Number: 15970
• Dimensions: 36 x 80 x 6 Inches
• Weight Capacity: 350 lbs
• HCPCS: E0184
• Warranty: 10 Year Limited on Foam, 1 year on cover

Mattress System Alternating Pressure with Low Air Loss 36 x 80 x 8 inches A pressure-reducing mattress like the 14027 Med-Aire Alternating Pressure Low Air Loss Mattress System redistributes a patient's weight to relieve pressure points where pressure ulcers or bed sores form. This system is particularly helpful for patients receiving at-home or hospital care who are confined to the bed for periods of time which temporarily cuts off skin's bloods supply. Patients who are thin or have blood vessel disease are particularly venerable.

• Product Number: 14027
• Dimensions: 36 x 80 x 8 Inches
• Weight Capacity: 350 lbs
• Weight: 5.7 lbs
• HCPCS: E0277
• Material: Quilted urethane coated nylon fabric & zippered PVC mesh
• Warranty: 12 Month Limited
• Whisper Quiet Pump Design
• CPR Valve for rapid deflation
• Low Pressure Alarm

42 Inch Headboard/Footboard, Mahogany (for model #s PCB301, PCB601, PCB901)

• Product Number: 42BWHF-FM
• 42 inch width
• Compatible with PCB301, PCB601, and PCB901 beds
• Pattern/Color: Figured Mahogany

42 Inch Headboard/Footboard, Oak (for model #s PCB301, PCB601, PCB901)

• Product Number: 42BWHF-SO
• 42 inch width
• Compatible with PCB301, PCB601, and PCB901 beds
• Pattern/Color: Solar Oak

Rotating 1/4 Assist Rail Pair for 902 Beds

• Bars occilate between and "up" and "down": positions
• Can securely lock into place or easily move out of the away via lever
• Allows patients freedom by assisting them in and and of bed

Rotating Assist Bar (for bed model #s PCB301, PCB601)

• Rotate between up and down position
• Held in position by a locking pin
• Quick installation/removal without tools
• Easily move them out of the way when you need to

Battery Backup for 902 Beds The battery backup for the 902 Primecare bed allows for the bed to be operated even during a power outage.

Tilt Top Overbed Table The Tilt Top Overbed Table by Drive Medical provides patients with a bit more freedom whether receiving care in a hospital or receiving home care. Having access to a table right at the patient's fingertips is not only convenient at mealtime, but it gives comfortable access for fun activities to help pass the day.

• Product Number: 13008
• Height: 26.5 - 39 Inches tall
• Tilt: 33 Degrees
• Material: Chrome Plated Steel
• Surface: Walnut Wood Grain Low Pressure laminate
• Swiveling Casters

Overbed Table: Color: Silver Vein The table top can be raised or lowered from 28 to 45 inches with by releasing the adjustment handle. This allows user to easily adjust height and give a nice work surface to work on a laptop, play a board game with a friend or enjoy a meal.

• Product Number: 13067
• Height: 28 - 45 Inches
• Dimension: 15 x 30 Inches
• Material: Walnut Laminate & Chrome Plated Steel