Customers Also Bought
Item Number: ILS450
The I-Lift scale is designed to provide an accurate and easy to use tool for weighing patients during transfers. The ILS450 digital scale features a 4-button panel, easy to read display and step-by-step operating instructions on the face panel.
Automatic shut-off feature prolongs battery life
Easy to operate, 4-button display
Fits on Invacare I-Lift models ILIFTEE and ILIFTEM
Precision scale mounted between boom and swivel bar accurately measures weights up to 450 lb.
Invacare I-Lift Patient Lift Scale Review (2:17 Minutes)
This video is not a replacement to your Owner’s Manual. Please refer to your Owner’s Manual for additional information. You can minimize resident handling by using the optional digital scale to combine the transfer and weighing processes. The scale is mounted between the boom and the hanger bar. It can be set to display either pounds or kilograms. Keep in mind that the resident’s weight must not exceed the lowest rated capacity of any component; the lift, the sling or the scale. The scale is easy to use, with clearly labeled controls, an easy-to-read display window, and operating instructions printed on the face panel. Attach the empty sling to the hanger bar. To get the most accurate reading, it’s a good idea to attach all sling straps to the center hooks on both sides of the hanger bar. Then, press the ON/OFF key, this turns the scale on. Press the ZERO key. The word ZERO will appear in the display window. The scale is now reset and ready for use. Place the resident in the sling. Raise the resident so that their weight is fully supported by the lift. The scale accurately measures the weight. It’s normal for the reading to fluctuate for a while during this process. When this fluctuation decreases to a rate of about two tenths of a pound, press the LOCK/UNLOCK key to lock the weight display. The word LOCK will flash in the display window to verify that the weight has been captured. This reading will remain in the scale’s memory until you press the LOCK/UNLOCK key to clear it. To conserve the battery life, the unit will automatically shut off after 2 minutes of disuse. However, the lock reading will remain in memory until you clear it.
- Additional Information
- Community Q&A