4 Inch Bed Extender
Bed Extender for CS Beds extends the sleep deck by 4 inches and is installed on the foot section of the bed.
Standard Wall Bumper
The Standard Wall Bumper attaches to the head end of the bed to the base. It extends out past the frame to keep the bed from touching and damaging the wall.
Long Wall Bumper
The Long Wall Bumper adds an additional 2 inches to the Standard Wall bumper to provide a larger margin of room between the bed frame and the wall.
Fixed Knee Lift
Fixed Knee Lift option does not let the leg section of the frame rise.
Ratchet Knee Lift
Raises the foot section of the frame in one inch increments. This option is standard with the CS7.
The High/Low Lockout is button on the foot of the bed that allows the caregiver to lock-out the high/low function of the pendant to prevent the patient from injuring themselves.
Caregiver Control Panel
Control panel inserted into the footboard, allowing caregivers access to all control functions of the bed.
The FloorLock System is a one touch lock that allows caregivers to tap a switch with their foot to lock and unlock the caster wheels.
Allows the front wheels to track straight (parallel) instead of moving in any direction. This is a helpful feature when one person is moving the bed through hallways or doorways.
Provides emergency backup power to operate all the functions of the bed during power failures. The Battery Backup offers up to 8 hours of backup power.