Bed Only - 42 Inch Wide
The Drive Medical 15303 Full Electric Bariatric Bed ensures the safety and comfort of the patient and provides peace of mind for the caregiver. This reliable, long lasting bed frame has an industry-leading weight capacity of 600 pounds. The frame has a heavy duty design to provide plenty of strength and stability. The bed frame is made entirely of steel and the sleep surface is larger than that of a normal hospital bed.
The Bariatric Bed 15300 by Drive Medical has a split-pan design and removable bed ends that are very easy to put together. The setup can be done in just a few minutes and does not require any tools. Included with this full-electric bed is a hand control that allows the bed to be moved into a variety of positions including varying degrees of back and knee elevation. Even during an emergency, the bed's manual crank makes it possible to adjust the position of the bed in case of a power outage. Patients and caregivers alike will enjoy the quiet, smooth operation of this Drive Medical bariatric bed. It is specially designed to operate smoothly and quietly to prevent any unnecessary noise and distraction.
The tool-less assembly has added benefits if you need to move the bed to another location or perform a deep cleaning. The all-steel enamel painted surface allows for easy cleaning while preventing the metal components from corroding and becoming less stable. The bed comes with two locking casters and tow non-locking casters allowing the bed to kept stationary.
The hand control pendant allows for every adjustment to be made electronically. The remote can raise and lower the head as well as the foot section of the bed. Additionally, the entire bed can be raised and lowered with the remote. Finally, the bed is specifically designed to standards that reduce the risk of pinching and entrapment. As long as the installation procedures are properly followed and adhered to the bed's user will have significantly reduced chances of entrapment and pinching.
If you need assistance moving and setting up your new bed, make sure to select the White Glove Delivery option prior to choosing "Add to Cart." With White Glove Delivery from Vitality Medical, you will have one to two highly skilled technicians that will move everything into your home, assemble it, ensure that it works properly, demonstrate its functionality and how to use it, and will remove any excess packaging upon leaving your home. Background checks have been done on every technician, so you can always rest assured that you're in safe hands.
White Glove Delivery is available by appointment in most states. Once you have placed your order, we will have an associate contact you to arrange a time that complements your schedule for the delivery and set up of your new bed.
***Disclaimer: White glove delivery is available in most states not including North Dakota. Please allow an additional 1-2 weeks for completion of white glove delivery.***
- Product Number: 15303BV1HR
- Weight Capacity: 1000 lbs.
- Bed Dimensions: 88L x 54W x 18.25 to 26.25H Inches
- Frame/Weld Warranty: 5/Limited Lifetime
- Mechanical Warranty: 1 Year
- Electrical Warranty: 1 Year
42 x 80 x 7 Inch Economy Bariatric Mattress The Bariatric Foam Mattress by Drive Medical is made of solid foam and is designed to provide the utmost comfort and support for bariatric patients. The foam provides high-density support in a one-piece construction.
- Product Number: 15301
- Dimensions: 42 x 80 x 7 Inches
- Weight Capcity: 585 lbs
- HCPCS: E0184
- Warranty: 1 Year
42 x 80 x 6 Inch, 650 Pound Capacity Mattress The Invacare Softform Premier Mattress is specifically used for bariatric patients and has been designed to prevent pressure ulcers. The mattress is made out of one piece of U core foam, which makes it far more durable than mattresses that include glued foam. The weight capacity for the mattress is 650 pounds. When a patient is going to be spending a lot of time in bed, prevent bed sores and ulcers are crucial. The Softform Premier mattress provides support for areas of the body that are prone to pressure ulcers. These areas include the ankles, heels, hips, and shoulders. The mattress has built-in side supports that make it easier to transfer the patient. To protect the foam, the mattress comes with a removable cover that is fluid resistant. The cover is easy to clean. It has four-way stretch to prevent friction and shear in order to protect the skin. Patients and caregivers will enjoy the comfort of the Invacare Softform Premier Mattress.
- Product Number: IPM1080B42
- Dimensions: 42 x 80 x 6 Inches
- Weight Capcity: lbs
- HCPCS: E0184
- Warranty: 8 Years on Foam, 4 Years for Cover
Mattress Bariatric Alternating Pressure Low Air Loss 42 x 80 x 10 inch Bariatric Alternating Pressure Mattress System from Drive Medical has a stretch cover that resists fluids while being vapor permeable. It is also low shear and zippered for easy removal. The cover hides 20 air bladder cells, each one 10 inches deep.
- Product Number: 14030
- Dimensions: 42 x 80 x 10 inches
- Audible low pressure alarm below 10-mmHg
- "Whisper Quiet Pump has 8 LPM air flow
- Material: Nylon/TPU
- 20 second deflation CPR valve
Bed Rail Options
Siderails T Style Half for Bariatric Beds 15300, 15302, 15303
- Product Number: 15021BV
- Material: 1 Inch Steel
- Brown Vein Finish
Overbed Table: Color: Silver Vein The Non-Tilt Overbed Table by Drive Medical has a lot of character with its silver vein finish and walnut wood grain laminate surface. It not only looks fantastic and blends well into a room, it cleans and maintains well. It's designed to fit nicely under the bed to use a lot of space.
- Product Number: 13067
- Height: 28 - 45 Inches
- Dimension: 15 x 30 Inches
- Material: Walnut Laminate & Chrome Plated Steel
Tilt Top Overbed Table The table top is made to be easily cleaned with the walnut wood grain laminate. It offers a great work station to serve meals, work at a computer or read a book.
- Product Number: 13008
- Height: 26.5 - 39 Inches tall
- Tilt: 33 Degrees
- Material: Chrome Plated Steel
- Surface: Walnut Wood Grain Low Pressure laminate
- Swiveling Casters
Sheet Set 42 x 80 x 8 Inch
- Product Number: 15030HBL4280
- Contains two 36 x 84 x 8 Inch fitted sheets
- Material: Cotton/Polyester Blend
- Warranty: 5 Year Limited
- Blended design, made of both high quality cotton and polyester, which translates to patient comfort
- Fitted sheets are machine washable
- Compatible with manual, semi-electric, or full-electric beds
- Additional Information
Additional InformationWhat's in the Bundle?
Sleep Surface Dimensions
Height - Low18.25 Inches
Height - High26.25 Inches
Caster Height5 Inches
Max Back Elevation60 Degrees
Max Knee Elevation58 Degrees
Max Foot ElevationNone
Maximum Trendelenburg ElevationNone
Maximum Reverse Tredenelburg ElevationNone
Product Weight338 lbs.
Maximum Weight Capacity1000 lbs.
Bed Model Number15303BV1HR
- Manuals & Documents
- Product Comparison
Sleep Surface Dimensions 42 x 80 Inch Width 54 Inch, Length 80 Inch Width 48 Inch, Length 80 Inch Height Adjustable 18.25 to 26.25 Inch Adjustable 18.25 to 26.25 Inch Adjustable 18.25 to 26.25 Inch Weight 231 Pounds 332 Pounds 312 Pounds Weight Capacity 600 Pounds 1000 Pounds 750 Pounds Maximum Back Angle NA NA 60 Degrees Maximum Knee Angle HA NA 58 Degrees Warranty 5 Year NA 5 Year Reviews View Product View Product View Product
- Community Q&A
Product QuestionsNo questions yet. Be the first to ask the question!