Etac Turner PRO Patient Transfer & Sit-to-Stand Aid

Etac Turner Pro Transfer and Standing Aid Overview

The Etac Turner PRO Transfer Aid provides a new, safety-enhanced way to transfer a person with limited mobility from seat to seat in both homes and healthcare facilities. This new Sit-to-Stand Aid makes user transfer between beds, chairs, wheelchairs, and toilets an easy and seamless process that enhances the safety of both patient and caregiver. Its unique design allows its user to hold the top handle to stand up and then be carefully turned to their new location. The handlebar and rotation function create the perfect conditions for quick transfers from one seat to another. In addition, integrated kneepads support the user as they are transferred. These kneepads are indented and soft for the user's comfort. This item's ergonomic structure and function also promote good posture for both the user and the caregiver who assists them and makes it easier for the caregiver to safely balance their own weight against the patient's. Both of these factors reduce the risk of injury for both parties. Finally, the bright orange, dual-handle is bright and easy for users with vision impairment or dementia to see and it gives both the user and patient the opportunity to go through the transfer process independently without physically touching.

In addition to these safety benefits, the Etac Turner Pro patient transfer device is a lightweight and transportable transfer aid option. This Mobility Aid's wheels allow the operator to efficiently glide the Etac Turner PRO across a facility or home without having to worry about lifting or otherwise carrying the Turner where it's needed. Its folding design and compact nature allow it to fit into the back of most cars for transport. These features also allow it to fit into small spaces, such as between beds, when it is in use.

Etac also provides the Molift Smart 150 for those looking for a patient hoist alternative.

 

Product Guide

How To Use the Patient Transfer System?

Intended Uses

This product helps users with mobility issues to rise from a sitting to standing position for their transfer to a wheelchair, chair, bed, commode, or toilet. The patient using this product must meet the following conditions:

• Have the ability to grip the transfer aid
• Have the ability to pull up their own body weight
• Need and acquire assistance from a caregiver to support themselves standing and to be turned. This caregiver must be able to handle the patient's weight.

This product should only be used on flat surfaces and is not for outdoor use.

 

How to Transfer from a Bed to a Chair (1:04 minutes)

 

Etac Turner Pro Transfer a Child from Bed to Chair (1:28 minutes)

 

What Comes in the Box?

• 1 External Pole
• 1 Internal Pole and Attached Handle
• 1 Standing plate
• 1 Leg Support
• 1 Turning Knob
• 3 Screws
• 1 Allen Key
• 1 User Manual

 

Use Preparation

1. After assembling the Etac Turner Pro standing and transfer aid, review the manufacturer's safety guidelines and post-assembly checklist to ensure the device has been properly assembled and for the user's safety (see the user manual at the bottom of this page).


2. Use the top adjustment knob to raise or lower the height of the handle. Try to match the user's needs as closely as possible, but further adjustment can be made later.


3. Use the lower adjustment knob to adjust the height of the leg support. The measuring scale on the support bar will allow you to note the correct height for future uses.


4. Position the seat the user will be transferred to if possible, then position the Etac Turner Pro patient transfer aid so it slides under the user's feet. Adjust the aid's leg and handle heights as seen in the diagram below.

Caregiver Use Instructions

1. Use both hands to firmly grip the top of the standing device's handle bar.


2. Put one foot on the footrest to stabilize it.


3. Create eye contact and communicate clearly with the patient. Maintain eye contact throughout the entire transfer process.
   
4. Ask the patient to use both hands (if possible) to firmly grip the bottom portion of the handle bar.


5. Ask the patient to carefully stand. Use your hands and feet and lean backwards to counterbalance the patient's weight as they rise.



6. Turn the transfer aid so the patient's backside is facing the frpmt of new seat.


7. With your foot on the footrest, brace your body weight.


8. Have the patient sit in the new seat.


9. Once the patient has been seated safely, the device can be pulled out of the way.

 

Frequently Asked Questions

What is a stand aid?
A stand aid is a device that helps individuals who are able to stand with assistance stand up so they can be transferred from a bed to a seat and vice versa. They can be used as part of a patient's regular care routine for chronic conditions such as muscular dystrophy or as a short-term assistant for those with more short-lived conditions, such as stroke recovery.

Can this item be used on carpet?
Yes, this product can be used on carpet and most any other flat surface. A swivel base that is independent of the platform makes turning easy, even in carpeted areas.

Can this item be transported in the back of a vehicle?
Yes, this item can be transported in most car trunks and backseats or over folded down passenger seats. The handlebar can be shortened and leg support lifted to reduce the size of this item for an easy fit.

Is this a good option for bariatric patients?
This product has a 440-pound weight capacity and so can support most bariatric patients. However, the individuals weight must remain within the perimeter of the base plate and the caregiver must be able to handle the weight of the individual.

 

Manuals and Documents

•    Product Manual contains user instructions for safe patient transfers.

•    Sell Sheet contains product details.

•    Spare Parts Sheet contains a parts list.

 

Product Videos 

Etac Turner PRO Patient Transfer Device Video (0:46 minutes)

 

Etac Turner Pro: Kate Davies Case Study - Product Demonstration (1:32 minutes)

 

Kate Davies about rehabilitating after a stroke with Etac Turner PRO (3:24 minutes)